Ipaq help

[spoofman]

i've recently purchased all the hardware required to connect my ipaq to my wireless home network i really need some help b/c everytime i try to connect to the internet on the ipaq i keeps wanting to dial as if its a dial up connection but i have cable and i have no idea on what to do i have spent many of days checking post and fourms and i have not yet found anything to fix my problem i have even called the manufacture of the wireless LAN card it is a pretec 802.11b card. Every time i go to the internet connections it only lets me choose between 2 modems and i don't want to use a modem i want to use my compact WLAN card and i have properly installed everything and try all the little tricks but i still can't seem to figure this one out... all and any help is appericated thanks much


spoofman

[go2duke]

Choose settings > connections and connections again.

Choose Modify on the internet settings and remove any dial-up or other settigns. If you do not have a modem this should be blank.

Reset the Wifi card and try again. If still not connecting we may have to dig much deeper. Also, you should try posting this to the Ipaq forum. Better answers likely there.

G2D

[mongoose_hq001]

This may be helpful as a similar project: D-Link. It is a compact flash card for home wireless networks. Being a beginner myself, it was actually sold to me by a beginner/veteran? (saw me coming) salesman as actually a full wireless web access card modem. I suggest you go through all avenues at the manufacturer of your mobile device and the network device. Sometimes there are conflicting set up instructions for mobile device settings between the two.

It may be as well you need to simply download drivers or upgrades to get it working properly.

Go To D-Link Wireless Network Modem Card:
http://www.dlink.com/products/wireless/dcf660w/

You may be able to read between the lines there, in similar instructions to your set up.