E740 and NT 4

[Ginita]

Hi has anyone synced their e740 with NT 4.0? Does anyone know if there is a serial cable available for this product?

[ctitanic]

Originally posted by Ginita
Hi has anyone synced their e740 with NT 4.0? Does anyone know if there is a serial cable available for this product?

e740 does not have a serial port. But you can simulate a serial port by using 3er party cables and drivers. You can find more information (links) about this topic at www.pc-counselor.8m.com/e740.htm

[Ginita]

Thanks so much for taking time to reply. I will definitely follow up.

[ctitanic]

I should add, that by buying those cables and using those drives you wont get acess to NT4, I have found that the e740 registy does not have the keys you need to connect it via serial port (because it does not have a serial port). So... Having the cable you are just in the middle of a long way to go. Unfortunatly I don't have the whole solution and just part of it. :rolleyes:

[dsf260]

bSquare has NT-based USB drivers that offer limited functionality--enough to get an e310 docking station working. You will need to have USB ports on your motherboard (you can always add them in with a PCI card: basic USB cards are around $10 and USB2 are around $40)

The software/driver runs $40. Here is the link.

http://store.bsquare.com/catalog/in...g&parent_id=127

Good luck. See the thread I created for more detail.

Darren

[Ginita]

Thanks for your help! :D