Click to See Complete Forum and Search --> : H5450 CF Card Issue
milanlad
04-08-2003, 02:53 PM
I have a H5450, with a CF Jacket (the one with a battery). I have a Sandisk SD card in the H5450 and a Sandisk CF Card in the Jacket. All has been working fine until today when I receive an error messaging saying "Unrecognized Card" and asking for the name of the device driver for this card.
The card is obviously not readable. I have already tried a soft reset with no success.
Can anyone help.
Thanks in advance.
Lowell2006
04-09-2003, 02:23 AM
Have you tried formatting the CF card?
I fiond that id that happens a few times of taking the sleeve on and off with the initialization process will make it read
Dont know if this will help but it is worth a try
Did you ever figure out what was causing the "unrecognized card" problem? I, now, am having the same problem and cannot figure it out. I have a 3955 with the cf expansion pack. The cards have worked flawlessly for several months. Now, with no system changes, I get the "unrecognized card" error asking me to enter the name of the device driver for this card. If I take the card out I can read it in my laptop's card reader but not in my Ipaq. I've tried the soft reset but no luck. This problem is happening with ALL my cards now -- Viking and Sandisk. Any help would be appreciated.
milanlad
05-21-2003, 02:51 PM
Try this. Take off the expansion sleeve. Do a soft reset. Then put the expansion sleeve back in without the CF card. Then put the CF cards in.
Hope this helps.
PDA Street
Copyright Internet.com Inc. All Rights Reserved.