Errol
05-14-2003, 07:28 PM
Maybe this is a problem you've dealt with before, but the stylus falls out from time to time. I never ever had this problem with my old and trusty Vx. Is there some way to fix this ?
Click to See Complete Forum and Search --> : Loose stylus on 515
CaptainIgnorant
05-15-2003, 12:49 AM
Have the little bumps worn down on the stylus?
I had this with the hard case stylus so I put a very thin layer of superglue on them to build them up. If you get them too thick you will have to sand them back. Not sure if the stylus or the silo (I heard this is what the slot is called) is worn but this worked for me.
The other thing I had to do with this stylus is drill a fine hole down it and fit a pin to reinforce it after the bugger broke (apparently this was a common problem with this particular stylus). I got a reset pin out of it as a bonus.
I had this with the hard case stylus so I put a very thin layer of superglue on them to build them up. If you get them too thick you will have to sand them back. Not sure if the stylus or the silo (I heard this is what the slot is called) is worn but this worked for me.
The other thing I had to do with this stylus is drill a fine hole down it and fit a pin to reinforce it after the bugger broke (apparently this was a common problem with this particular stylus). I got a reset pin out of it as a bonus.
PDA Street
Copyright Internet.com Inc. All Rights Reserved.
Copyright Internet.com Inc. All Rights Reserved.