mellz
06-06-2003, 09:54 PM
Elsewhere on this forum I have described my problems getting an an Enterasys Wi-Fi card working with my Netbook. (Problem still unsol ved despite`much advice from forum members).
I now have a similar problem with wired ethernet. I have burchased a Psion Gold Card 56K Moden 10/100 MB Ethernet Lan Global CombineIT PCMCIA card, the one that is supposed to work with the Netbook. However, I have not been able to connect to the internet with it.
My system is:
ADSL line -> Westell DSL Moden -> Addtron router (1 Ethernet input to 4 ethernet outputs) -> Gold Card in Netbook.
The router and netbook can see each other, because the "Link" lights on both the router and the Gold Card dongle light up when I open Opera or Ping with flfngr. However, I reeive no response with ping and an error messgae (after dely) with oper, either "network error" or "cannot resolve host address."
I have tried both of the following setups: (1) Get internet address and DNS address from server; and (2) inputting the i.p. address and DNS addresses assigned by my ISP. Since my ISP assignes dynamic addresses, the IP adress changes with each sesion though the DNS addresses seem ti stay the same.
Could someone please elad me through the settings for both Ethernet settings and Internet settings? BTW, when I try to set up internet settings, the dropsown menu gives me choices of only dialup nd direct cable connection. I have been choosing the latter.
Thanks.
mellz
I now have a similar problem with wired ethernet. I have burchased a Psion Gold Card 56K Moden 10/100 MB Ethernet Lan Global CombineIT PCMCIA card, the one that is supposed to work with the Netbook. However, I have not been able to connect to the internet with it.
My system is:
ADSL line -> Westell DSL Moden -> Addtron router (1 Ethernet input to 4 ethernet outputs) -> Gold Card in Netbook.
The router and netbook can see each other, because the "Link" lights on both the router and the Gold Card dongle light up when I open Opera or Ping with flfngr. However, I reeive no response with ping and an error messgae (after dely) with oper, either "network error" or "cannot resolve host address."
I have tried both of the following setups: (1) Get internet address and DNS address from server; and (2) inputting the i.p. address and DNS addresses assigned by my ISP. Since my ISP assignes dynamic addresses, the IP adress changes with each sesion though the DNS addresses seem ti stay the same.
Could someone please elad me through the settings for both Ethernet settings and Internet settings? BTW, when I try to set up internet settings, the dropsown menu gives me choices of only dialup nd direct cable connection. I have been choosing the latter.
Thanks.
mellz