solid state disks

[jschutrups]

Hello!

I `ve got a problem. I`ve got a Psion series 3 for approx. 10 years and also two Solid State Disks. On this disks I`ve accumulated throughout the years a lot of information which I`d like to move to my newly bought Ericsson MC218. Is there somebody who can tell me how to do this? I would be most grateful!!!

[MikeMcC]

You need to connect the Series 3 with PsiWin to copy the files to the PC, convert from Series 3 format to Series 5 format (including MC218) and then copy the files to the MC218.

[jschutrups]

Thank you for your advise!
Can I use every PsiWin-release for the Series 3 or do I need a specific one?

[MikeMcC]

The original PsiWin 1.0 or 1.1 for the Series 3 would not be able to convert to 5mx/MC218 format. Unless you are using WinXP, which requires PsiWin 2.3.3, I would suggest you use 2.3.1 for the conversions.

2.3.1 English:
www.psion.com/downloads/pc/psiwin2/231/english.zip
(http://www.psion.com/downloads/pc/psiwin2/231/english.zip)

2.3.1 Dutch:
www.psion.com/downloads/pc/psiwin2/231/NDERLNDS.zip
(http://www.psion.com/downloads/pc/psiwin2/231/NDERLNDS.zip)

2.3.3 English:
www.psion.com/downloads/pc/psiwin2/233/english.exe
(http://www.psion.com/downloads/pc/psiwin2/233/english.exe)

2.3.3 Dutch:
www.psion.com/downloads/pc/psiwin2/233/nderland.exe
(http://www.psion.com/downloads/pc/psiwin2/233/nderland.exe)

Be aware though that each of these downloads is about 25 Megabytes.

[jschutrups]

Thanks again! Since I have WinMe I`m gonna use the PsiWin 2.3.1. That is: if I can get hold of the cable`s somewhere.