Screen protectors

[FOBoi1122]

here's my problem:

i recently bought a pack of 12 screen protectors by Berklin for my 1945. Once i applied the projectors, i realized that there's lots of air bubbles or rough areas under the protector. Is there any way to get rid of that stuff?? it's really bugging me. Please tell me any techques you might know for getting rid of this.

[exscentric]

Since it is on, you might trya flat spatula or something flat and try to work the bubbles out - it is little bubbles of air.

when you put the things on you need to start at one end and work them as you lay them down and slide your finger back and forth as you slowly lay them down. This keeps the bubbles from forming.

Don't do a lot of pressing or you could damage the unit, just light pressure.

[bass_machine]

Best way is to carefully unpeel it, and repply it very slowly, with slightly more pressure using the applicator. I just reapplied my new screen protector yesterday, and it turned out great. But considering it'll never be perfect... don't worry too much if you have a couple air bubbles :)

[strickjh05]

Try washing your hands with bleach. Then you can touch the sticky part and not get stuck or get skin and oil on it!

[ultimate_pda]

I used to use the adhesive style and I disliked them greatly. The left the air bubbles, hard to get of, ect. Now I use the NuShield ones. No adhesive!!! They are much more clear.


http://www.nushield.com/