Fatal Alert everytime Find function is used

[bebs]

am a new user of T3. everytime i use the Find function this dialogue box apprears:

Emul68kMain.c,Line:456,
line 1111 exception at
address 00105FBE

please help. thanks.

[Moose Man]

Have you installed the T3 update available here (http://www.palmone.com/us/support/downloads/tungstent3/t3_update.html#download)

I'd try that first. Don't worry, if it's already installed then it will warn you.

:)

[rugby4ne1]

You probably running Documents to Go version 6.002 which came with your T3. Upgrade to DTG v.6.005 and the problem should go away.

[cemuller]

I am running the later version of Docts to Go that another responder referred to... I just had this start occurring (but had seldom used Find before- possibly never on T2).... I am going to HotSync tonight and hard resent and see if I can cure it that way. BTW, Find in ListPro itself, continues to work flawlessly (must not use Palm Find)... Please post if you find a cure.
Good Luck.

[stephen505]

Upgrading to v6.005 only gets a 90% cure.

Once you have got this version (a free upgrade from the one supplied on the T3 disc), you can dowload a 'patch' from the DataViz web site for this specific problem.

Works a treat once this is done.

Stephen

[Ircr]

There is another thread with the same issue on page 8. The solution worked. In preferences, in DTG, uncheck, global find option. Test find. Re-enable global find in DTG. It helped me.