Can't get Fugawi UK to see iQue GPS

[7driver]

I've just installed Fugawi UK. I've had to beat it around to get it to transfer colour maps (installing the demo version of Fugawi 3 from fugawi.de fixed this bug) and now they appear fine on the iQue.

However, when the iQue gets a GPS fix, it does not appear in the Fugawi application. It is working fine in the in-built mapping etc.

Does anyone know what I need to do to get this to work?

I'm using the latest desktop app - 310473 and have 01.02.05 on the iQue.

I'm at a loss!

Thanks for any help

db

[semaj]

I am having the same problem with my Ique. No satellites on Fugawi and also no gps on Cetus GPS. Not sure what is going on.

[jonasolof]

Originally posted by 7driver
I've just installed Fugawi UK. I've had to beat it around to get it to transfer colour maps (installing the demo version of Fugawi 3 from fugawi.de fixed this bug) and now they appear fine on the iQue.

However, when the iQue gets a GPS fix, it does not appear in the Fugawi application. It is working fine in the in-built mapping etc.

Does anyone know what I need to do to get this to work?

I'm using the latest desktop app - 310473 and have 01.02.05 on the iQue.

I'm at a loss!

Thanks for any help

db

That desktop app is the latest only for Fugawi UK. The rest is .557

In Fugawi GPS prefs Baud rate 4800 Port number 0

You might have locked it with trying to enable BT. Press clear BT also.

Cetus:

Prefs: Serial port Ique baud rate 4800

[7driver]

Thanks, Jonas.

I've checked that the settings are port 0, baud 4800.

I'm not sure what you mean by clearing BT?

It's still not getting a fix in Fugawi UK. I believe that 3.10.473 should be iQue compatible.

Do you have any other ideas?

Thanks

db

[semaj]

After working with the IQue today I have discovered that the conflict is with the Speed program. When the Speed program is enabled then Fugawi will not get a fix. Disable Speed program and Fugawi works. I have sent a email to the programer of Speed.

The problem that I was having with Cetus GpS was my fault. I downloaded the 1.1 version instead of the beta. All is fine now.

One lesson that I have learned is to load one program at a time and make sure everthing works before loading another.

[7driver]

Great discovery!

I deleted the Speed application and it's all working fine now. MAy try to reinstall to see at what point it breaks again, but not tonight!

db

[semaj]

Good to hear that you had the same results. Hope the programer can find a fix. I have not deleted Speed but I have it disabled.

[jonasolof]

City Select and other proprietary internal mapping sw can use the GPS at the same time as an external app such as Fugawi does it. But I sincerely doubt that several apps could run simultaneously using the same comm port.