Digitizer Calibration?

[rpabst]

Bought my wife a M105 which she loved. Unfortunately now the screen does not resond well at all to the stylus. Particularly in the lower parts of the screen the palm "thinks" the sylus is about a 1/8th inch (pretty big compared to screen size) above where it actually is. It is well ilistrated if I open the notepad and draw a straight line from right to left at the bottom of the writting area. The actual line starts out in the correct location, but begins to digress upward and then returns a little, even as the stylus stays straight. I've tried reseting several times, and have even tried some 3rd party apps, but with no luck.

Any suggestions?

[Calvados]

Rpabst,

Have you tried the following program, I found it on Palmgear and it says that it will solve almost all digitzer problems. It is called: Z-Digitizer and it is freeware. Here is the link:

Link to Z-Digitizer (http://www.palmgear.com/software/showsoftware.cfm?sid=80023820020826232746&prodID=9161)

All I did was a search for "Digitizer" and it came up with quite a few and this one sounded good.

Hope that this will help and Have a good day,
Calvados

[DrMud]

Most of the digitizer fixes, DigiFix, SureTap, and Z-Digitizer address the Palm V/Vx common problem of loosing contact with the digitizer after a reset. Your issue seems to be a corruption in the digitizer portion of the OS. I would make every effort to take this issue directly to Palm tech support and from there to a replacement unit.
DrMud