NOKIA 6510 connection problem

[geakem]

i try to connect to the net (freeserve, 08450796699) with my revo through my 6510, but all i get is a busy tone. It isn't freeserve cos i can dial them normally and get through.

Any suggestions???

Josh.

[MikeMcC]

If you have "smart" dialling enabled, make sure the number has been entered as

+44 845 0796699, that is without the leading zero in the area code. If that isn't the problem, ask again.

[geakem]

nope, still the same busy tone

[MikeMcC]

OK, create the file path C:\Logs\Etel\ and, after the next connection attempt, have a look at the GSMTSY.txt log file in the Etel folder to see what number has actually been dialled.

[geakem]

----------New Log----------
22.51:40:468750 Tx: AT

22.51:40:500000 Rx: AT

22.51:40:515625 Rx:
OK

22.51:40:515625 Tx: AT&F&K4

22.51:40:640625 Rx: AT&F&K4

22.51:40:718750 Rx:
OK

22.51:40:718750 Tx: AT

22.51:40:828125 Rx: AT

22.51:40:890625 Rx:
OK

22.51:40:906250 Tx: AT+FCLASS=?

22.51:41:031250 Rx: AT+FCLASS=?

22.51:41:078125 Rx:
0,1,2,2.0

OK

22.51:41:093750 Tx: ATE0Q0V1

22.51:41:203125 Rx: ATE0Q0V1

22.51:41:265625 Rx:
OK

22.51:41:281250 Tx: ATS7?

22.51:41:390625 Rx:
060

OK

22.51:41:406250 Tx: ATS0=0

22.51:41:515625 Rx:
OK

22.51:41:531250 Tx: AT+CMGF=?

22.51:41:640625 Rx:
+CMGF: (0,1)

OK

22.51:41:656250 Tx: AT+CMGF=0

22.51:41:765625 Rx:
OK

22.51:41:781250 Tx: AT+CNMI=?

22.51:41:906250 Rx:
+CNMI: (0-2),(0-3),(0,2,3),(0-2),(0,1)

OK

22.51:41:906250 Tx: AT+CNMI=1,1,0,0,0

22.51:42:031250 Rx:
OK

22.51:42:031250 Tx: AT+CPMS=?

22.51:42:156250 Rx:
+CPMS: ("ME","SM"),("ME","SM"),("MT")

OK

22.51:42:156250 Tx: AT+CPMS?

22.51:42:281250 Rx:
+CPMS: "SM",18,20,"SM",18,20,"MT",18,170

OK

22.51:42:281250 Tx: AT+CPBS=?

22.51:42:406250 Rx:
+CPBS: ("ME","DC","MC","RC","SM","FD")

22.51:42:453125 Rx:
OK

22.51:42:468750 Tx: AT+CGMI

22.51:42:578125 Rx:
Nokia Mobile Phones

OK

22.51:42:593750 Tx: AT+CGMM

22.51:42:703125 Rx:
Nokia 6510

OK

22.51:42:718750 Tx: AT+CGMR

22.51:42:843750 Rx:
V 04.06
18-06-02
NPM-9
(c) NMP.

OK

22.51:42:843750 Tx: AT+CGSN

22.51:42:953125 Rx:
350882105451113

OK

22.51:42:968750 Tx: AT+FCLASS=0

22.51:43:078125 Rx:
OK

22.51:43:093750 Tx: ATM0L1X3S8=4

22.51:43:203125 Rx:
OK

22.51:43:218750 Tx: AT

22.51:43:328125 Rx:
OK

22.51:43:343750 Tx: AT

22.51:43:453125 Rx:
OK

22.51:43:468750 Tx: ATD+44 845 0796699

22.51:51:500000 Rx:
NO CARRIER

what the hell does all that mean?!?!?!

please suggest!!!

thanks

[MikeMcC]

22.51:43:468750 Tx: ATD+44 845 0796699

22.51:51:500000 Rx:
NO CARRIER

what the hell does all that mean?!?!?!Don't worry about what it all means. The dialup ran right through to the end without an error response. Try this:

In Control Panel / Internet
Uncheck "smart" dialling and just enter the number exactly as it should be dialled including the leading zero in the area code - 08450796699

In Control Panel / Modems
Uncheck "Carrier detect (DCD)"

If it still doesn't dial properly, open the Comms application, go in the menus to "Tools / Communication settings" and set the port to Infrared. Now try dialing from Comms by entering ATD08450796699 and pressing Enter. Let me know the result of that.

[geakem]

it just keeps on telling me the call was unexpectantly terminated

[MikeMcC]

Ah! Now that message usually means that your account with your phone's network provider hasn't been enabled for Data calls. Contact your network provider and have them enable Data calls for you.