Imation SD card on rx1950

[mrlocom]

i have got an Imation SD card i-express-3 512MB 80x , it works ok, but i am unable the remove the SD card physically from my ipaq, any idea ?

[AnswerDude]

Just slightly pushing down on the card itself, it will pop out.

[mrlocom]

no reaction even with a hard push. The original "dummy plastic" can be removed easily because there is a "hole" when you put your "second finger" into it so that it can pull out. But there is none with the SD card. No way to pull it or push it. (i insert it correctly because the PDA and activesync can recognize the SD card). Although there may be no need for me to take the SD card out forever, it is anyway good to know the way to take it out.

ty

[mrlocom]

oh, it works now, it is ok now, with a semi-push for 3 seconds, it pops out.

ty answerdude.

[mrlocom]

it has to exert more force with the fingernail of the thumb. This way to remove is even better because the SD card will not be easily lost as it is not too easy to remove. It is good. When you push it with the "meat of the second finger", it will not goes out or have any reaction.

[mocketpc]

FWIW, most SD card slots have a spring loaded push-latch/push-eject mechanism that latches the notches on sides of SD card, most of these devices come with warnings to never pull an SD card out or the locking mechanism *may* be compromised and possibly prevent SD insertion afterwards. maybe you already know this but the posts i read indicated a pulling action to an inserted /latched SD card.