hard reset

[moshalan]

:oHow I do hard reset?

[avijohn]

WARNING: There is a risk of data loss. Performing a hard reset will remove all added programs, updates and records stored on the handheld. It is strongly recommended to perform a HotSync® operation, if possible, before performing a hard reset.

1.Remove the stylus from the handheld.
2.Remove the stylus pin by twisting the upper end of the stylus counter-clockwise.
3.Press and hold down the power button.
4.On the back of the handheld, use the stylus pin to press and release the reset button.
5.Continue to hold down the power button until the Palm OS® logo screen appears.
6.Release the power button.
7.At the Erase all data? screen, press the up arrow on the scroll button.

WARNING: There is a risk of software corruption. Do not attempt to use any handheld functions until after the Setup screens have been completed.

Follow the onscreen prompts to complete the Setup screens.
NOTES:

If the Erase all data? screen does not appear, the hard reset has not been successful and must be performed again.
If the scroll button was used prior to the hard reset, the reset may not be performed.
If the handheld is inoperable and will not reset, charge the handheld and try again.

[moshalan]

Got it... thankyou very much