solmer
01-15-2003, 01:33 PM
Hi all, I'm a new Mobilion user. I've received today a 4600 unit (without power cord) and here is the problem....(i'll explain it from the start)..:
I've connected it using +5v from my computer (using the correct adaptor) and the mobilion power up ok but I see a message saying that I must to recharge main batts . or backup batt. may be low so I try again getting the same message...
I've got another backup batt. but now I try to power on but mobilion don't weakup... ambar led dont light either....
May be due dead batt.?
How can I fix this problem?...I've thinking about connecting two nimh batt to the pins on the mobilion since I don't have an original spare batt. but I don't know how to do it...I know alone pin on the batt. comp. is the negative pin but ...Which is the possitive pin (oposite negative pin are two pins)...
Any help would be very apreciated...Im deseperated... :(
Thanks a lot.
Best regards...
I've connected it using +5v from my computer (using the correct adaptor) and the mobilion power up ok but I see a message saying that I must to recharge main batts . or backup batt. may be low so I try again getting the same message...
I've got another backup batt. but now I try to power on but mobilion don't weakup... ambar led dont light either....
May be due dead batt.?
How can I fix this problem?...I've thinking about connecting two nimh batt to the pins on the mobilion since I don't have an original spare batt. but I don't know how to do it...I know alone pin on the batt. comp. is the negative pin but ...Which is the possitive pin (oposite negative pin are two pins)...
Any help would be very apreciated...Im deseperated... :(
Thanks a lot.
Best regards...